Introduction:
1.Cast aluminum shell with high heat dissipation performance and lightweight, suitable for various acidic and alkaline solutions.
2.Non-toxic and odorless.
3.Adopts cam mechanism and completely leak-free, can be placed in a tank or pipeline.
4.The pump head where contact medium made of PVC, optional PTFE, stainless steel, aluminum alloy, etc.
5.Cost-effective and widely used in water treatment industries with low pressure requirements.
6.The flow rate can be adjusted at any time during pump operation or stop, and it can also be quantitatively output.
7.The diaphragm is made of a multi-layer composite structure, with the first layer being an acid-resistant Teflon film, the second layer being EPDM elastic rubber, the third layer being a 3mm thick SUS304 supporting iron core, the fourth layer being reinforced with nylon fibers, and the fifth layer being completely covered with EPDM elastic rubber, effectively improving the service life of the diaphragm.
Structure:
The pump consists of three parts: motor, transmission box, and cylinder body.
The transmission box component is composed of a bow-shaped connecting rod cam mechanism, stroke adjustment mechanism, and speed ratio worm mechanism; the high stroke adjustment is achieved by rotating the adjustment handwheel, which changes the front and back distance in the bow-shaped connecting rod to change the stroke of the plunger (piston).
The cylinder body component is composed of a pump head, suction valve assembly, discharge valve assembly, plunger, and packing seal.
Performance table
